Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1

Continue Shopping Shopping Cart
Item removed from Cart
X
 
×

AllTitanParts

(713) 931-0006

Titan 0276454 Nozzle #4 Guided

Titan 0276454 Nozzle #4 Guided

Sourced From:
Titan Tools Inc.

 

Titan part 0276454 is a #4 guided nozzle used on the SprayTech HVLP Maxum II sprayer. This direct‑replacement nozzle controls material flow and spray pattern for fine finishing applications.

Part Number 0276454
Part Description Nozzle #4 Guided
Brand Titan
Fits
  • SprayTech HVLP Maxum II
Condition New

Retail Price: $70
You save: $5.81 (8.30%)
Our Price: $64.19

 

#4 Guided Nozzle for SprayTech HVLP Maxum II (Titan Part)

The Titan 0276454 #4 Guided Nozzle is a genuine OEM replacement nozzle for the SprayTech HVLP Maxum II sprayer. The "#4" designation indicates a specific orifice size, while the guided design ensures consistent material flow and atomization for fine finishing applications such as furniture, cabinetry, and automotive coatings.

A worn, clogged, or damaged nozzle can cause uneven spray patterns, reduced transfer efficiency, and poor finish quality. Replacing with the correct OEM nozzle restores original spray characteristics and ensures optimal performance.

Service Guidance: Clean the nozzle regularly with compatible solvent. Do not use metal tools to clean the orifice, as scratching will damage the spray pattern. Replace the nozzle if the orifice is worn, enlarged, or if the spray pattern becomes inconsistent after cleaning.

What it does and when to replace it

What the #4 guided nozzle provides
Material flow control Precise orifice size meters coating output
Spray pattern shaping Guided design produces consistent fan pattern
Fine finish capability Ideal for thin materials and detail work
When replacement is recommended
Uneven or distorted spray pattern Tails, fingers, or streaks in the fan
Reduced output / poor atomization Nozzle worn or partially clogged
Visible damage to orifice Nicks, scratches, or enlarged opening
After cleaning, pattern remains poor Internal wear cannot be restored by cleaning

Compatibility

Titan 0276454 is compatible with the following SprayTech HVLP model. Always confirm fitment using the parts diagram for your specific sprayer.

Brand / Model Component
SprayTech HVLP Maxum II #4 Guided Nozzle

Related parts commonly serviced together

When replacing the nozzle, these related components are often inspected or replaced at the same time.

Air cap / air ring

Inspect for damage or dried paint; clean or replace to ensure proper atomization.

Needle assembly

If material flow is inconsistent, inspect the needle and seat for wear.

Fluid filter / strainer

Contaminants that clog nozzles often originate from the cup or material; check filters.

Frequently Asked Questions

It is a #4 guided nozzle for the SprayTech HVLP Maxum II sprayer, controlling material flow and spray pattern for fine finishing.

The "#4" designation typically indicates an orifice diameter of approximately 0.043 inches (1.1 mm), suitable for medium‑viscosity materials such as lacquers, stains, and lighter paints. Consult your Maxum II manual for specific recommendations.

Signs include an uneven or distorted spray pattern (tailing, fingering), reduced material output, poor atomization, or visible damage to the orifice after cleaning.

Yes, you can clean the nozzle with compatible solvent and a soft brush or compressed air. However, do not use metal probes or pins, as they can scratch the orifice. If cleaning does not restore a consistent pattern, replace the nozzle.

Copyright © 2024 AlltitanParts.com - All Rights Reserved.

Payment Methods