Titan 0154375 Cam
OEM Titan Drive Component
Titan 0154375 Cam is a genuine OEM precision-machined cam used in the drive system of SprayTech ED1150 airless sprayers. It converts rotary motor motion into the reciprocating motion needed to drive the pump piston, restoring smooth operation and consistent spray pressure when the original cam is worn or scored.
Compatibility
Replace if the cam lobe shows visible wear, scoring, or flat spots, or if spray pressure fluctuates and the drive area makes unusual knocking sounds. Inspect the cam follower and drive shaft during replacement.
Titan Cam Replacement
Titan 0154375 Cam for SprayTech ED1150 Airless Sprayers
Titan 0154375 is a precision-machined cam used in the drive system of SprayTech ED1150 airless sprayers. Mounted on the drive shaft, its eccentric lobe pushes against a follower to create the reciprocating stroke that drives the pump piston, drawing paint in and pushing it out under high pressure.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Precision-ground cam mounted on the drive shaft with an eccentric lobe profile that converts rotary motion into linear reciprocating motion. |
| Function | Converts rotary motion from the motor or gearbox into the linear reciprocating motion required to drive the pump piston. The eccentric lobe pushes against a follower connected to the piston rod, creating the back-and-forth stroke that draws paint in and pushes it out under high pressure. |
| Catalog-Listed Application | SprayTech ED1150. Bedford Precision reference guide lists 0154375 as the cam for the ED1150 model. |
| Replacement Indicators | Visible wear or scoring on the cam lobe surface (grooves, flat spots, roughness), pressure fluctuations due to uneven piston motion, reduced output, or unusual knocking or thumping sounds from the drive area. |
| Related Parts Commonly Serviced Together | Cam follower/bearing (rides directly on the cam; wear here will affect a new cam), drive shaft/key (inspect for wear that could cause loose cam fit), and piston rod/connecting rod (check for bending or wear at the cam contact point). |
| Installation Note | Inspect the cam follower, bearings, and piston rod for wear. Ensure the cam is properly keyed or secured to the shaft and torqued to specifications. Lubricate according to the service manual during assembly. |
| Target Users / Markets | Painting contractors, rental fleets, maintenance crews, and repair shops running compatible SprayTech ED1150 airless sprayers. |
| Commercial Benefits | Restores smooth, consistent pump operation, eliminates pressure fluctuations, and prevents further drive system wear caused by a worn cam. |
The 0154375 Cam is a precision drive component, not a complete drive assembly. Before ordering, confirm the part number in the machine parts diagram. The cam and follower wear together; replacing only the cam may result in accelerated wear if the follower is worn or damaged.
Frequently Asked Questions
Contractor-focused answers for confirming fitment, function, and service application.
No reviews yet. Be the first to review this product!