StatiKit part 0132726 is a Spray Tip designed for use with the StatiKit 2000 electrostatic spray system. This precision tip determines the spray pattern and flow rate, ensuring consistent atomization and optimal transfer efficiency. Replace worn or clogged tips to maintain spray quality and electrostatic performance.
| Part Number | 0132726 |
|---|---|
| Part Description | Spray Tip |
| Brand | StatiKit |
| Fits | StatiKit 2000 Electrostatic System |
| Condition | New |
The StatiKit 0132726 Spray Tip is a precision‑machined orifice that controls the spray pattern, droplet size, and flow rate for the StatiKit 2000 electrostatic spray system. It is designed to work with the electrostatic charging process, ensuring that coating particles are properly atomized and charged for maximum transfer efficiency and wrap‑around.
Electrostatic spraying relies on a properly shaped and atomized spray to achieve optimal results. A worn, damaged, or incorrectly sized spray tip can lead to poor atomization, reduced electrostatic effect, uneven coverage, and increased overspray. Replacing the tip with this genuine StatiKit part restores system performance and finish quality.
| Spray pattern control | Determines the shape and width of the spray fan |
|---|---|
| Flow regulation | Orifice size controls the volume of material delivered |
| Atomization | Breaks coating into fine droplets for optimal electrostatic charging |
| Worn orifice | Overspray, uneven pattern, or increased flow due to tip wear |
|---|---|
| Clogged or damaged | Partial blockages or nicks that distort the spray pattern |
| Reduced transfer efficiency | Poor wrap-around or excessive overspray during electrostatic application |
| Material change | Switching to a different coating that requires a different tip size or pattern |
StatiKit part 0132726 is specifically designed for use with the StatiKit 2000 electrostatic spray system. It is compatible with all standard configurations of the StatiKit 2000 that accept replaceable spray tips.
| Compatible System | Application |
|---|---|
| StatiKit 2000 Electrostatic System | Spray Tip |
* Always verify compatibility with your specific gun configuration and coating type.
When replacing the spray tip, it's good practice to inspect these related components to ensure optimal system performance.
Protects the spray tip; replace if damaged or if the seal is compromised.
Worn needle or seat can cause dripping or inconsistent flow; inspect and replace as needed.
Affects atomization and pattern shaping; clean or replace if clogged or damaged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
