StatiKit part 0128215 is an Aircoat Nozzle 18/50 Flat designed for use with the StatiKit 2000 electrostatic spray system. This precision nozzle delivers a flat spray pattern with an 18/50 orifice size, optimized for applying medium- to high-viscosity coatings with excellent atomization and minimal overspray. Replace worn or clogged nozzles to maintain consistent spray quality and electrostatic transfer efficiency.
| Part Number | 0128215 |
|---|---|
| Part Description | Aircoat Nozzle 18/50 Flat |
| Brand | StatiKit |
| Fits | StatiKit 2000 Electrostatic System |
| Condition | New |
The StatiKit 0128215 Aircoat Nozzle (18/50 Flat) is a precision spray tip designed for the StatiKit 2000 electrostatic spray system. The "18/50" designation indicates a 0.018-inch orifice with a 50-degree fan angle, producing a flat spray pattern ideal for applying medium- to high-viscosity coatings—including enamels, primers, and heavy-bodied materials—with high transfer efficiency.
Electrostatic spraying relies on a properly shaped and atomized spray to achieve optimal wrap-around and material savings. A worn, damaged, or incorrectly sized nozzle can lead to poor atomization, reduced electrostatic effect, uneven coverage, and increased overspray. Replacing the nozzle with the correct StatiKit OEM part restores system performance and finish quality.
| Spray pattern control | Produces a consistent 50° flat fan pattern for uniform coverage |
|---|---|
| Atomization | Breaks coating into fine droplets for optimal electrostatic charging |
| Flow regulation | 18/50 orifice size delivers precise material volume for the application |
| Worn orifice | Overspray, uneven pattern, or increased flow due to tip wear |
|---|---|
| Clogged or damaged | Partial blockages or nicks that distort the spray pattern |
| Reduced transfer efficiency | Poor wrap-around or excessive overspray during electrostatic application |
| Material change | Switching to a different coating that requires a different orifice size or pattern |
StatiKit part 0128215 is specifically designed for use with the StatiKit 2000 electrostatic spray system. It is compatible with all standard and optional configurations of the StatiKit 2000 that accept Aircoat series nozzles.
| Compatible System | Application |
|---|---|
| StatiKit 2000 Electrostatic System | Aircoat Nozzle 18/50 Flat |
When replacing the nozzle, it's good practice to inspect these related components to ensure optimal system performance.
Protects the nozzle tip; replace if damaged or if the seal is compromised.
Worn needle or seat can cause dripping or inconsistent flow; inspect and replace as needed.
Affects atomization and pattern shaping; clean or replace if clogged or damaged.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
