Titan 0093635 Outlet Ball
OEM Titan Valve Component
Titan 0093635 Outlet Ball is a genuine OEM 6mm carbide check ball that seats against the outlet valve seat to prevent backflow and maintain system pressure on compatible HVLP Airspray, AirCoat, and SprayTech sprayer pumps. It restores positive valve sealing when the original ball is worn, pitted, or scored.
Compatibility
Replace if the pump cannot build or maintain pressure, loses prime when stopped, or the ball shows visible pitting, scoring, or flat spots. Inspect the seat and spring during replacement.
Titan Outlet Ball Replacement
Titan 0093635 Outlet Ball for HVLP and SprayTech Sprayer Pumps
Titan 0093635 is a precision 6mm carbide ball used in the outlet valve assembly of compatible sprayer pumps. It works with the valve seat and spring to create a one-way check valve that maintains system pressure and prevents backflow during pump operation.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Precision spherical component manufactured to tight tolerances from hard, wear-resistant carbide to withstand repeated impact and the abrasive nature of paints and coatings. |
| Function | During the pressure stroke, fluid forces the ball off the seat, allowing flow out of the pump. When pressure equalizes or reverses, the ball is pushed back against the seat by spring force and back pressure, creating a seal that prevents fluid from flowing back into the pump. |
| Manual-Documented Application | Titan ProFinish AS1130 and SprayTech ED655. The ED655 manual identifies a 6mm carbide ball in the outlet assembly, and the AS1130 troubleshooting guide lists the outlet valve ball and seat as wear items. |
| Catalog-Listed Applications | Titan ProFinish AS1130; SprayTech AirCoat, ED655 Plus, ED655, ED1075; Wagner 425, 505, 525, 830-835, 844, 848. Confirm exact model and serial number. |
| Replacement Indicators | Unable to build or maintain pressure, pump loses prime when stopped, visible pitting, scoring, or flat spots on the ball surface, or fluid leaking past the valve. |
| Related Parts Commonly Serviced Together | Outlet valve seat, outlet valve spring 0047485, valve cage, and copper seal washer 9970103. |
| Installation Note | Inspect the valve seat and spring for wear during replacement. Clean the valve area of debris before installing the new ball. |
| Target Users / Markets | Painting contractors, rental fleets, maintenance crews, and repair shops running compatible AirCoat and SprayTech sprayers. |
| Commercial Benefits | Restores positive valve sealing, maintains system pressure, prevents backflow, and ensures efficient pump operation. |
The 0093635 Outlet Ball is a precision 6mm carbide component, not a generic ball bearing. Before ordering, confirm the part number in the machine parts diagram. A worn ball allows fluid to leak back, causing loss of pressure, poor priming, and reduced efficiency.
Frequently Asked Questions
Contractor-focused answers for confirming fitment, function, and service application.
No reviews yet. Be the first to review this product!