Titan positions the Helix VR 2.3 for two-component polyurea, polyaspartics and epoxies on infrastructure, industrial and marine work. It is a heated plural-component proportioner, not a paint or fine finish sprayer. Before choosing one, confirm the coating maker's ratio, the electrical supply, how far the hose has to reach, and how you will clean up.
People find the Helix VR 2.3 by searching for a sprayer and expect a paint machine. It is something different: an electric, heated proportioner that mixes two-part coatings at the sprayer. That makes the first question about the coating, not the sprayer. This page covers what Titan positions the VR for and what to settle before you commit to one.
What Titan positions the VR for
Titan and its distributors describe the Helix VR 2.3 as a system for two-component polyurea, polyaspartics and epoxies. The work it is aimed at is infrastructure, industrial and marine. That is a different world from the trim, cabinet and wall coatings that fine finish and airless sprayers handle.
What those coatings ask of the equipment
Three of the Helix VR's listed features line up with what a two-part job demands. We stay with what Titan lists and do not add chemistry of our own.
- An accurate A to B ratio. The VR runs two electronically controlled pumps and a Smart Select controller, and covers any ratio from 1:1 to 1:4.
- Heated material. The SureFire system uses a block heater and an in-hose heating element, with the temperature adjustable at the gun.
- A heated path to the gun. The hose is part of that heating path, and heated hose assemblies are listed as separate products on the site.
What each coating needs in practice, including ratio and temperature, is on the coating maker's data sheet. That sheet governs the job, and we do not give numbers for it.
How the VR, FR and LP differ in use
Titan Helix families and the coatings each is positioned for
| Family | Ratio | Positioned for |
|---|---|---|
| Helix VR 2.3 | Variable, 1:1 to 1:4 | Two-component polyurea, polyaspartics and epoxies |
| Helix FR / FR28 | Fixed, true 1:1 | Polyurea, polyaspartics and spray polyurethane foam (FR28) |
| Helix LP | 1:1 | Low-pressure spray foam |
Sources: MCC and Wagner Australia product listings and Titan articles. The family-by-family numbers are in our Helix comparison guide.
For a coating that is not 1:1, the variable ratio is the reason to look at the VR. If your work is spray foam, the LP is the foam system, and the FR28 is listed for foam as well as polyurea and polyaspartics. Many parts say Helix FR and VR together in their fits field, but the LP parts are separate.
Questions to answer before you choose
What ratio does the coating call for?
Read it off the data sheet. If it falls within 1:1 to 1:4, the VR covers it. If it is outside that, the VR is not the right machine.
Is the power there?
The US specification published by MCC is 230 V, 3 phase, 70 A, and Wagner Australia also lists 3 phase, 70 A. Other markets use different voltages, so check the data plate on the unit you are buying.
Can the hose reach?
Plan the route from the machine to the work. The site lists a heated hose assembly, and the hose length you need should be confirmed before you order.
How will you clean up?
A two-component coating cures, and you do not want it curing in the pump, hose or gun. Follow the coating maker's guidance on how soon to flush, and the sprayer manual on how.
Parts and manuals
The site has no Helix diagram pages, so the parts are individual listings. Fitment is whatever the catalog's fits field says, and our parts team can confirm it on (713) 931-0006. Titan's Helix VR, FR, LP and hose manuals are on our manuals page. For the wider catalog, open the Titan parts list or the sprayer parts category.
- 558981 Repacking Kit, listed for Helix FR and Helix VR.
- 0509123A Upper Packing Assembly, listed for Helix FR28 and VR2.3.
- 0138638A Heater Block and 138936 Temp Controller, listed for Helix VR and FR.
- 0153731 Heated Hose Assembly (100'), listed for Helix FR and VR.
Safety on two-component jobs
Helix VR parts that match the topics above:
The Short Version
The Helix VR 2.3 is for two-part polyurea, polyaspartic and epoxy work on infrastructure, industrial and marine jobs. Settle the ratio, the power supply, the hose route and your cleanup plan first, then use the manuals page and our parts team for fitment.
Not sure a Helix is the right fit?
Call (713) 931-0006 with the coating you plan to spray and the model you are looking at, and our parts team will point you to the right manual and parts.
(713) 931-0006Order by Parts Diagram