Titan part 0294499 is a valve seal used in fluid section inlet or outlet valves of compatible airless sprayers. This precision seal prevents fluid bypass, maintains pumping pressure, and ensures proper valve seating. Replace a worn, cracked, or hardened valve seal to restore consistent pressure, eliminate leakage, and extend pump life on SprayTech Airless, PowrLiner, and PowrBeast units.
| Part Number | 0294499 |
|---|---|
| Part Description | Valve Seal |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 0294499 Valve Seal is a critical elastomeric sealing component used in the inlet and outlet valve assemblies of the fluid section on compatible airless sprayers. It provides a leak‑tight seal against the valve ball or poppet, ensuring that paint flows in the correct direction and that pressure is maintained during the pump stroke. The seal is made of a material resistant to paint solvents, abrasion, and compression set.
Over time, valve seals can harden, crack, or become deformed due to chemical exposure, heat, or normal wear. A failed valve seal causes internal leakage, pressure loss, erratic spray, poor priming, or paint weeping from the pump. Replacing a worn valve seal with a genuine Titan 0294499 restores proper valve function, consistent pressure, and pumping efficiency on SprayTech Airless EP2510/EP2400/EP2300/EP2300 SE, PowrLiner 6950/4950, and PowrBeast 4700/7700/9700/4700T models.
| Prevents fluid bypass | Seals between valve ball/poppet and seat |
|---|---|
| Maintains pressure | Ensures consistent pumping output |
| Supports priming | Helps inlet valve seal for proper suction |
| Visible damage | Cracks, flattening, hardening, or swelling of seal |
|---|---|
| Pressure loss | Sprayer runs but cannot reach or maintain pressure |
| Poor priming | Pump won't draw paint or loses prime |
| Erratic spray | Pulsation or spitting from tip |
Titan part 0294499 is compatible with the following airless sprayers. Always confirm fitment using the correct parts diagram for your exact model.
| Brand / Model | Component |
|---|---|
| SprayTech Airless EP2510 | Valve seal |
| SprayTech Airless EP2400 | Valve seal |
| SprayTech Airless EP2300 | Valve seal |
| SprayTech Airless EP2300 SE | Valve seal |
| PowrLiner 6950 | Valve seal |
| PowrLiner 4950 | Valve seal |
| PowrBeast 4700 | Valve seal |
| PowrBeast 7700 | Valve seal |
| PowrBeast 9700 | Valve seal |
| PowrBeast 4700T | Valve seal |
When replacing the valve seal, inspect these related components.
Check for scoring, wear, or out‑of‑round condition – replace if damaged.
Inspect the mating seat for pitting or erosion.
Ensure the retainer is not damaged and torques properly.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
