Titan CP-FELCFM-PPSR2 Spray Gun
$719.97
$883.40
Save 19%
Available to Order
C.A. TECHNOLOGIES FE-LINE LOW CFM HVLP PPS CAT PACK
C.A. Technologies CP-FELCFM-PPSR2 FE-Line Low CFM HVLP Spray Gun CAT Pack combines a lightweight pressure-feed gun, three fluid setups, two air caps, and regulated 1-quart PPS pressure cup for portable professional finishing with flexible low-air-consumption performance.
Manufacturer: C.A. Technologies Part Number: CP-FELCFM-PPSR2 Type: Low CFM HVLP Pressure Feed Cup: 1-Quart PPS Pressure Cup
This is C.A. Technologies equipment, not Titan OEM. The CAT Pack includes 0.8, 1.3, and 1.7 mm setups plus 21-1090 and 21-1094 air caps. The 21-1090 low-CFM configuration uses only about 6 CFM at 15 PSI.
Quantity
Genuine OEM Part
Fast Shipping
Easy Returns
Manufacturer: C.A. Technologies Gun: FE-Line LCFM Setups: 0.8 / 1.3 / 1.7 mm Low-CFM Air Cap: 6 CFM @ 15 PSI Cup: 1-Quart PPS Pressure Cup
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | CP-FELCFM-PPSR2 is the PPS pressure-cup CAT Pack configuration of the C.A. Technologies FE-Line LCFM HVLP platform. It combines the 15-ounce pressure-feed gun with 0.8, 1.3 and 1.7 mm needle/nozzle setups, two air caps, a regulated 1-quart PPS pressure cup, tools and carrying case. |
| Function | The regulated PPS pressure cup delivers coating to the pressure-feed FE-LCFM gun while compressed air atomizes the material. The included 21-1090 low-CFM air cap uses approximately 6 CFM at 15 PSI. The included 21-1094 configuration uses approximately 13 CFM at 33 PSI for applications benefiting from greater atomizing airflow. |
| Industrial Applications | Designed for professional pressure-feed finishing where portability and efficient compressor use are important. Applications include cabinetry, furniture, architectural millwork, woodworking, onsite refinishing, metal finishing and general production coating using compatible stains, dyes, lacquers, enamels, sealers, primers, clears and other appropriately matched materials. |
| Accurate Compatible Titan Machines | CP-FELCFM-PPSR2 is not a Titan OEM component and has no verified model-specific Titan sprayer fitment. It is a C.A. Technologies compressed-air pressure-feed CAT Pack with its own regulated PPS material source. A suitable compressor is required; the standard 1.3 mm x 21-1090 configuration is specifically designed for low air consumption. |
| Accurate Part Number | C.A. Technologies CP-FELCFM-PPSR2. Manufacturer catalog literature also displays the configuration as CP-FELCFM-PPS-R2. It is the FE-Line LCFM CAT Pack with PPS pressure cup. Related configurations include CP-FELCFM Smart Pack and CP-FELCFM-303R2 with a regulated aluminum pressure cup. |
| Compatible Parts & Assemblies | The CAT Pack includes 0.8, 1.3 and 1.7 mm needle/nozzle setups plus 21-1090 and 21-1094 air caps. The broader FE-LCFM platform supports 0.5, 0.8, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6 and 1.7 mm fluid nozzles and 21-1090 through 21-1094 air-cap configurations. Gun connections are 1/4-inch NPS male air and 3/8-inch NPS male fluid. |
| Related Parts Commonly Serviced Together | Routine service should include the installed fluid nozzle, common 40-1801 fluid needle, selected air cap, 21-1001 air-cap ring, 60-1317 fan control, gun seals and controls, pressure-cup regulator, material connections, liner components and pressure hardware. C.A. Technologies specifies repair kit 10-140 for the FE-Line LCFM gun. |
| Common Problems Solved | The FE-LCFM reduces the compressor demand that can make conventional HVLP equipment difficult to use for mobile or smaller-shop work. Its 21-1090 setup needs approximately 6 CFM, while the PPS pressure-cup configuration provides controlled material delivery without requiring a separate remote pressure tank for many finishing applications. |
| Use with Coating Systems | The FE-LCFM nozzle chart covers very thin inks, dyes, solvents and stains through progressively heavier compatible finishing materials. The supplied 0.8, 1.3 and 1.7 mm configurations provide a practical working range for thin, medium and heavier coatings. Final nozzle, air-cap and material-pressure settings should follow coating viscosity and manufacturer application requirements. |
| OEM & Brand Information | CP-FELCFM-PPSR2 is manufactured by C.A. Technologies and is not Titan-manufactured OEM equipment. The FE-Line LCFM is a forged-aluminum, lightweight HVLP pressure-feed platform weighing approximately 15 ounces. C.A. Technologies states HVLP transfer efficiency of 65% or better and specifies repair kit 10-140. |
| Commercial Benefits | Professional finishers gain a complete portable pressure-feed package with three fluid setups, two airflow ranges and a regulated PPS material system. The low-CFM configuration can reduce compressor requirements, while the PPS cup format supports efficient material handling and makes the package attractive for mobile finishing, smaller shops and varied production work. |
Contractor Selection Insight
Choose CP-FELCFM-PPSR2 when you need the low compressor demand of the FE-Line LCFM but prefer a PPS pressure-cup system over the reusable aluminum cup supplied with CP-FELCFM-303R2. The 21-1090 configuration requires only about 6 CFM at 15 PSI, and C.A. Technologies states this allows operation with a suitable 2 HP compressor. The included 21-1094 air cap provides a higher-airflow option when the application calls for it.
FAQ Section
Key answers for professionals selecting the CP-FELCFM-PPSR2 CAT Pack.
No reviews yet. Be the first to review this product!