Titan part 975-212 is a 2‑gun manifold with ball valves designed for use on compatible Titan airless sprayers. This manifold splits a single fluid input into two independent outputs, each controlled by its own ball valve, allowing two spray guns to be connected and operated alternately without disconnecting hoses. A cracked, leaking, or corroded manifold can cause pressure loss, fluid leaks, or cross‑contamination between guns. Replacing with the OEM manifold restores proper flow distribution, independent gun control, and system reliability.
| Part Number | 975-212 |
|---|---|
| Part Description | 2-Gun Manifold With Ball Valves |
| Brand | Titan |
| Fits |
|
| Condition | New |
The Titan 975-212 2‑Gun Manifold is a genuine OEM replacement manifold assembly that allows two spray guns to be connected to a single pump output. Each outlet is equipped with its own ball valve, enabling independent shut‑off and switching between guns without draining the system or disconnecting hoses.
This manifold is commonly used on larger airless sprayers where two operators may work from one machine, or where different tips/guns are needed for different applications. Over time, the manifold body can crack from freeze damage or over‑tightening, the ball valves can leak or become stiff, and internal seals can fail. A damaged manifold causes fluid leaks, pressure loss, or the inability to isolate one gun. Replacing with OEM Titan 975-212 restores full functionality, leak‑free operation, and easy gun switching.
| Splits fluid flow | Divides single pump output to two guns |
|---|---|
| Independent control | Each ball valve allows separate gun shut‑off |
| Quick switching | Change between guns without disconnecting hoses |
| Pressure isolation | Isolate one gun for service while other runs |
| Visible cracks | Cracks in manifold body near ports |
|---|---|
| Ball valve leaks | Fluid seeps from valve stem or outlet when closed |
| Stiff or stuck valve | Handle difficult to turn or seized |
| External leaks | Leak from manifold body or fittings |
Titan part 975-212 is a direct OEM replacement 2‑gun manifold for the following models. Always verify with your machine's parts diagram.
| Model | Component |
|---|---|
| Hydra M | 2‑gun manifold with ball valves |
| Hydra Pro Super | 2‑gun manifold with ball valves |
| Impact 1640 | 2‑gun manifold with ball valves |
| PowrBeast 4700 | 2‑gun manifold with ball valves |
| PowrBeast 7700 | 2‑gun manifold with ball valves |
| PowrBeast 9700 | 2‑gun manifold with ball valves |
| PowrBeast 4700T | 2‑gun manifold with ball valves |
| PowrTex 6900SF | 2‑gun manifold with ball valves |
| PowrTex 12000SV 0528919D | 2‑gun manifold with ball valves |
| PowrTwin 3500 (50th anniversary) | 2‑gun manifold with ball valves |
| PowrTwin 4500 | 2‑gun manifold with ball valves |
| PowrTwin 4900 | 2‑gun manifold with ball valves |
| PowrTwin 6900 | 2‑gun manifold with ball valves |
| PowrTwin 8900 | 2‑gun manifold with ball valves |
| PowrTwin 12000 Plus | 2‑gun manifold with ball valves |
| PowrTwin 4900XLT | 2‑gun manifold with ball valves |
| PowrTwin 4900GH | 2‑gun manifold with ball valves |
| PowrTwin 6900XLT DI | 2‑gun manifold with ball valves |
| PowrTwin 6900 XLT | 2‑gun manifold with ball valves |
| PowrTwin 6900GH | 2‑gun manifold with ball valves |
| PowrTwin 8900GH | 2‑gun manifold with ball valves |
| PowrTwin 12000GHD | 2‑gun manifold with ball valves |
| PowrTwin 12000 Plus DI | 2‑gun manifold with ball valves |
| PowrTwin 12000 XLT DI | 2‑gun manifold with ball valves |
| PowrTwin 12000XLT | 2‑gun manifold with ball valves |
| PowrTwin 12000GH | 2‑gun manifold with ball valves |
| PowrTwin TM 8900 XLT | 2‑gun manifold with ball valves |
When replacing the 2‑gun manifold, inspect these associated components.
Check for cracks, bulges, or worn fittings.
Ensure guns are in good working order to avoid back‑pressure issues.
Use fresh sealant on all NPT connections.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
