This Titan 940-557 ball valve is a direct replacement high-pressure fluid control component designed for use on compatible Hydra M and Hydra Pro Super equipment. Featuring 1/2" FBE (Female Brass End) connections and rated for 3000 PSI, it provides reliable on/off flow control for paint and coating materials in high-pressure spray systems. Replacing a worn or leaking ball valve restores proper fluid control, prevents drips and pressure loss, and ensures safe operation.
| Part Number | 940-557 |
|---|---|
| Part Description | Ball Valve, 1/2" FBE, 3000 PSI |
| Brand | Hydra M, Hydra Pro Super |
| Compatible Models | Hydra M Hydra Pro Super |
| Condition | New |
The Titan 940-557 Ball Valve is a genuine Titan-manufactured replacement high-pressure fluid control component designed for use on compatible Hydra M and Hydra Pro Super equipment. This valve features 1/2" FBE (Female Brass End) connections and is rated for 3000 PSI, making it suitable for demanding paint and coating applications in airless spray systems.
Ball valves provide reliable quarter-turn on/off flow control, allowing operators to isolate sections of the fluid system, control flow to accessories, or shut off supply for maintenance. Over time, valve seals can wear, ball surfaces can become scored, or internal components can corrode due to chemical exposure, leading to leaks, difficult operation, or failure to seal completely. Replacing a worn or leaking ball valve with this genuine Titan component restores positive flow control, prevents drips and pressure loss, and ensures safe, reliable operation of your Hydra equipment.
| Flow control | Provides quarter-turn on/off control of fluid flow |
|---|---|
| System isolation | Allows isolation of system sections for maintenance or accessory control |
| Pressure containment | Withstands high operating pressures up to 3000 PSI |
| Leaking | Fluid leaking from valve body, stem, or seats |
|---|---|
| Difficult operation | Handle hard to turn or stuck in position |
| Failure to seal | Valve does not fully shut off flow when closed |
| Corrosion or damage | Visible corrosion, cracks, or physical damage |
| Valve Type | Ball Valve |
|---|---|
| Connection Size | 1/2" FBE (Female Brass End) |
| Pressure Rating | 3000 PSI |
| Operation | Quarter-turn handle |
| Material | Brass construction with compatible seals |
| Condition | New |
This Titan 940-557 ball valve is designed for use on the following Hydra models. Always confirm fitment using the correct parts diagram for your exact model and revision.
| Hydra Model | Component |
|---|---|
| Hydra M | Ball Valve, 1/2" FBE, 3000 PSI |
| Hydra Pro Super | Ball Valve, 1/2" FBE, 3000 PSI |
When replacing the ball valve, these associated components are often inspected or replaced to ensure a complete repair.
Inspect mating fittings for thread damage or corrosion; replace as needed.
Check hoses connected to the valve for wear or damage; replace if compromised.
Use fresh thread sealant appropriate for high-pressure fluid systems when reinstalling.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
