SprayTech part 755-201 is a drive shaft and pinion assembly used to transfer power from the motor to the pump on compatible sprayer units. This critical component converts rotational motion from the motor into the reciprocating motion needed for pump operation.
| Part Number | 755-201 |
|---|---|
| Part Description | Drive Shaft & Pinion |
| Brand | SprayTech |
| Fits | 690 GXC Airless Sprayer; Advantage GPX 85; PowrLiner 2850 GB_D_F; PowrLiner 1800M, 2800M; PowrLiner 2800; PowrLiner 3100; ProMark II; RentSpar 700 |
| Condition | New |
The SprayTech 755-201 Drive Shaft and Pinion assembly is a mechanical power transmission component that transfers rotational force from the motor to the pump mechanism on compatible sprayer models.
This assembly converts the motor's rotary motion into the linear reciprocating motion required for pump operation. The drive shaft connects to the motor output, while the pinion gear engages with other drive components to create the pumping action. Proper alignment and condition of these components are essential for efficient power transfer and smooth pump operation.
| Power transmission | Transfers rotational power from motor to pump |
|---|---|
| Motion conversion | Converts rotary motion to reciprocating pump action |
| Load bearing | Supports mechanical loads during pump operation |
| Gear tooth wear | Worn, chipped, or damaged pinion teeth |
|---|---|
| Shaft damage | Bent, cracked, or scored drive shaft |
| Excessive play | Too much movement or looseness in the assembly |
| Unusual noises | Grinding, clicking, or knocking sounds from drive area |
SprayTech part 755-201 is compatible with the following SprayTech sprayer models. Always confirm fitment using the correct parts diagram for your exact model and revision.
| SprayTech Model | Component |
|---|---|
| 690 GXC Airless Sprayer | Drive shaft & pinion |
| Advantage GPX 85 | Drive shaft & pinion |
| PowrLiner 2850 GB_D_F | Drive shaft & pinion |
| PowrLiner 1800M | Drive shaft & pinion |
| PowrLiner 2800M | Drive shaft & pinion |
| PowrLiner 2800 | Drive shaft & pinion |
| PowrLiner 3100 | Drive shaft & pinion |
| ProMark II | Drive shaft & pinion |
| RentSpar 700 | Drive shaft & pinion |
Drive system maintenance often involves multiple interconnected components. When replacing the drive shaft and pinion, these parts are commonly inspected or replaced simultaneously.
Connects the motor to the drive shaft; check for wear or damage.
Components that mesh with the pinion gear; inspect for wear.
Support components for the drive shaft; check for wear.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
