Titan 697-823 TR1 823 Line Striping Tip
TITAN TR1 REVERSIBLE LINE STRIPING TIP
Titan 697-823 TR1 823 Line Striping Tip is a professional reversible airless tip with an 8-inch nominal line width and .023-inch orifice. Titan specifies this combination for most traffic paints where a medium-film application is required.
The .023-inch opening provides approximately 0.57 GPM / 2.15 LPM reference flow. Select this TR1 tip when your Titan line striper has sufficient pump capacity and your traffic coating calls for an 8-inch medium-film pattern.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 697-823 is a TR1 reversible line-striping spray tip engineered for professional pavement-marking applications. Titan's TR1 chart specifies an 8-inch / 203 mm nominal line width, .023-inch / .58 mm orifice and medium-film classification for most traffic paints. |
| Function | The precision orifice controls material flow while the tip geometry forms the specified line-striping fan pattern. As a reversible airless tip, the tip can be rotated to the reverse position to help clear certain tip obstructions, then returned to the spray position for continued striping. |
| Industrial Applications | Suitable for professional traffic and pavement-marking operations requiring a wider 8-inch nominal stripe. Applications can include parking facilities, road and traffic markings, industrial pavement layouts and other compatible line-striping work where the coating and sprayer are suitable for a .023-inch tip. |
| Accurate Compatible Titan Machines | Titan documents TR1 tips throughout its PowrLiner line-striping equipment literature. Compatibility is governed by the individual machine's maximum supported tip size, number of guns being operated and coating requirements. Use 697-823 only with a compatible Titan PowrLiner configuration capable of supporting at least a .023-inch tip for the intended gun setup. |
| Accurate Part Number | Titan 697-823 — TR1 823 reversible line-striping tip. The verified specification is an 8-inch / 203 mm nominal line width with a .023-inch / .58 mm orifice. Titan classifies this combination as medium film for most traffic paints. |
| Compatible Parts & Assemblies | Use with a compatible Titan airless line-striping spray gun, approved reversible-tip guard, tip seal, appropriate gun filtration and high-pressure hose system. The complete spray system must be suitable for the selected traffic coating, required operating pressure and .023-inch tip opening. |
| Related Parts Commonly Serviced Together | When replacing a worn TR1 tip, inspect the tip guard, seal, spray-gun filter, gun fluid passages and hose connections. Also check the line striper's fluid filtration and pressure performance. Worn or restricted supporting components can affect fan definition, material flow and overall stripe consistency. |
| Common Problems Solved | Replacing a worn 697-823 can help correct deterioration caused by normal abrasive tip wear, including loss of fan definition, changes in material delivery and reduced control over stripe quality. The reversible design also provides a practical method for clearing certain tip blockages during production. |
| Use with Coating Systems | Titan's TR1 chart places 697-823 in the “most traffic paints” group and specifies medium-film application. The .023-inch orifice has an approximate reference flow of 0.57 GPM / 2.15 LPM. Actual output and stripe quality depend on coating viscosity, pressure, filtration, machine capacity, surface conditions and application technique. |
| OEM & Brand Information | 697-823 is a genuine Titan Tool TR1 professional line-striping tip. TR1 tips are documented throughout Titan's PowrLiner technical literature as purpose-built tip selections for pavement and field-marking work, with individual part numbers selected according to desired line width, orifice and film requirement. |
| Commercial Benefits | The 823 configuration gives professional crews a wide 8-inch nominal pattern while its .023-inch opening supports medium-film traffic-paint application. This combination can help contractors cover wider markings efficiently while retaining the convenience of a reversible tip for productive airless striping work. |
Contractor Selection Insight
Choose 697-823 when the job calls for an 8-inch nominal stripe, a .023-inch orifice and medium-film application with compatible traffic paint. Do not confuse the 823 with the smaller-orifice 697-821, which uses the same 8-inch line-width class but a .021-inch opening. Before ordering, confirm that your PowrLiner's maximum tip capacity supports .023 inch for the number of guns you plan to operate.
FAQ Section
Key answers for contractors selecting Titan 697-823 TR1.
No reviews yet. Be the first to review this product!