Titan 697-415 TR1 415 Line Striping Tip
TITAN TR1 REVERSIBLE LINE STRIPING TIP
Titan 697-415 TR1 415 Line Striping Tip combines a 4-inch nominal line width with a .015-inch orifice for controlled light-film application. This genuine Titan reversible airless tip is documented for professional stencil and athletic-court marking applications.
Titan places 697-415 in the Stencils & Athletic Courts section of its TR1 chart and classifies it for light-film application. Choose it when a 4-inch pattern and controlled .015-inch material opening match the coating and job requirements.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 697-415 is a TR1 reversible airless line-striping tip. Titan documentation specifies a 4-inch / 102 mm nominal line width and .015-inch / .38 mm orifice. Within Titan's TR1 selection chart, 697-415 is categorized for light-film stencil and athletic-court marking. |
| Function | The .015-inch opening meters coating while the tip geometry forms a 4-inch nominal marking pattern. Its reversible construction allows the operator to rotate the tip into the cleaning position to help clear certain obstructions, then return it to the spray position and continue marking. |
| Industrial Applications | Titan specifically places 697-415 in the Stencils & Athletic Courts group. It is suited to compatible professional court layouts, stencil markings and related line-marking work where the specification calls for a 4-inch nominal pattern with light film rather than the heavier coating deposition of larger-orifice tips. |
| Accurate Compatible Titan Machines | Titan documents 697-415 in official tip charts supplied with multiple PowrLiner systems, including PowrLiner 550, PowrLiner 850, PowrLiner 2850 and PowrLiner 3500 literature. It is suitable for compatible Titan PowrLiner configurations whose gun, guard, coating requirements and maximum tip capacity support a .015-inch tip. |
| Accurate Part Number | Titan 697-415 — TR1 415 Line Striping Tip. Verified specifications are a 4-inch / 102 mm nominal line width and .015-inch / .38 mm orifice. Titan identifies the 415 configuration as a light-film selection within its Stencils & Athletic Courts category. |
| Compatible Parts & Assemblies | Use with a compatible Titan airless line-striping spray gun, reversible-tip guard, tip seal, appropriate gun and machine filtration, high-pressure hose and PowrLiner fluid-delivery system. The complete system must support the .015-inch opening and the viscosity and solids content of the selected marking coating. |
| Related Parts Commonly Serviced Together | Inspect the tip guard, tip seal, gun filter, gun fluid passages, machine filtration and high-pressure hose connections when replacing the spray tip. Correct gun height and secure gun-positioning hardware should also be checked because these factors directly affect stripe width and edge definition. |
| Common Problems Solved | Replacing a worn 697-415 can help restore the intended fan pattern when normal abrasive wear causes poor line-edge definition, excessive coating delivery or pattern deterioration. Its .015-inch opening also provides a controlled light-film alternative when a larger 4-inch-pattern tip would apply more coating than required. |
| Use with Coating Systems | Titan classifies 697-415 for light-film stencil and athletic-court applications. Use only with coatings whose manufacturer permits a .015-inch airless tip, and match filtration, pressure and material preparation to the coating specification. Do not assume that every traffic paint can be properly sprayed through this relatively small opening. |
| OEM & Brand Information | 697-415 is a genuine Titan Tool TR1 line-striping tip documented in Titan PowrLiner operating manuals and striping-tip charts. The TR1 family provides multiple fan-width and orifice combinations so contractors can match coating delivery and stripe dimensions to specific professional marking applications. |
| Commercial Benefits | The 415 configuration gives professional contractors a 4-inch nominal stripe while keeping material delivery lower than larger-orifice 4-inch TR1 selections. This makes it a useful manufacturer-specified choice for controlled light-film stencil and athletic-court work where consistent coverage and coating economy are important. |
Contractor Selection Insight
Choose Titan 697-415 when you need a 4-inch nominal marking with light film and your coating is approved for a .015-inch airless opening. Compared with the .013-inch 697-413, the 415 provides a larger material passage while retaining Titan's light-film classification. For most traffic-paint work requiring more film build, compare the application requirements with larger 4-inch TR1 options such as 697-417 or 697-419.
FAQ Section
Key answers for contractors selecting Titan 697-415 TR1.
No reviews yet. Be the first to review this product!
