Titan 697-413 TR1 413 Line Striping tip
TITAN TR1 REVERSIBLE LINE STRIPING TIP
Titan 697-413 TR1 413 Line Striping Tip produces a 4-inch nominal stripe through a .013-inch orifice. Titan specifies this reversible airless tip for light-film stencil and athletic-court applications and recommends using a 100-mesh filter.
The 697-413 is a specialized low-output TR1 selection for light-film work. Titan places it in the Stencils & Athletic Courts category and specifically calls for a 100-mesh filter, making proper filtration an important part of the setup.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 697-413 is a TR1 reversible airless line-striping tip. Titan's official PowrLiner tip charts specify a 4-inch / 102 mm nominal line width and .013-inch / .33 mm orifice. It is classified for light-film stencil and athletic-court applications with a 100-mesh filter. |
| Function | The .013-inch precision orifice meters a relatively small volume of coating while the tip geometry forms the 4-inch nominal striping pattern. The reversible configuration allows the tip to be rotated to help clear certain obstructions before returning it to the normal spraying position. |
| Industrial Applications | Titan places 697-413 specifically within the Stencils & Athletic Courts section of its TR1 tip chart. It is intended for light-film marking work where a 4-inch nominal pattern and low-output .013-inch opening are appropriate for the selected coating and application requirements. |
| Accurate Compatible Titan Machines | Titan documents 697-413 in official PowrLiner operating literature, including PowrLiner 550, PowrLiner 850, PowrLiner 2850 and PowrLiner 3500 tip charts. The tip can be used with compatible Titan line-striping systems that support its .013-inch orifice, gun/guard configuration and required coating. |
| Accurate Part Number | Titan 697-413 — TR1 413 Line Striping Tip. Verified manufacturer specifications are a 4-inch / 102 mm nominal stripe and .013-inch / .33 mm orifice. Titan classifies the tip for light-film use and specifies a 100-mesh filter. |
| Compatible Parts & Assemblies | Use with a compatible Titan line-striping spray gun, reversible-tip guard, tip seal, high-pressure hose and properly filtered fluid-delivery system. The 100-mesh filtration specified by Titan for this .013-inch application is important for reducing particles capable of obstructing the relatively small tip opening. |
| Related Parts Commonly Serviced Together | When servicing the 697-413, inspect the compatible tip guard and seal, 100-mesh filtration components, spray-gun filter, gun fluid passages, hose connections and machine filtration. A damaged seal, contaminated filter or restricted fluid passage can adversely affect material delivery and spray-pattern quality. |
| Common Problems Solved | Replacing a worn 697-413 helps restore the intended 4-inch pattern when normal tip wear reduces edge definition or alters coating delivery. Its .013-inch opening also provides a lower-output alternative to larger 4-inch TR1 tips when the job requires a lighter film rather than heavier material deposition. |
| Use with Coating Systems | Titan specifies 697-413 for light-film application in the Stencils & Athletic Courts category and explicitly calls for a 100-mesh filter. Confirm that the marking coating can be properly atomized through a .013-inch airless tip and that its solids and viscosity are appropriate for the required filtration. |
| OEM & Brand Information | 697-413 is a genuine Titan Tool TR1 line-striping tip documented across Titan PowrLiner operating literature. It belongs to Titan's range of reversible striping tips offering different fan widths and orifice sizes so contractors can match tip output to coating, stripe width and film-build requirements. |
| Commercial Benefits | The 413 configuration gives contractors a 4-inch nominal marking pattern with the low material delivery of a .013-inch opening. It is a practical manufacturer-specified choice for light-film stencil and athletic-court work where larger 4-inch TR1 tips could apply more material than the job requires. |
Contractor Selection Insight
Choose Titan 697-413 when the job calls for a 4-inch nominal stripe with light film rather than the greater material delivery of larger-orifice 4-inch tips. Titan specifically places the 413 in its Stencils & Athletic Courts group and requires 100-mesh filtration. If greater film build is needed, compare the coating requirements with larger 4-inch TR1 sizes such as 415, 417 or 419 before selecting the tip.
FAQ Section
Key answers for contractors selecting Titan 697-413 TR1.
No reviews yet. Be the first to review this product!