Titan 697-219 TR1 219 Line Striping Tip
TITAN TR1 REVERSIBLE LINE STRIPING TIP
Titan 697-219 TR1 219 Line Striping Tip delivers a narrow 2-inch nominal spray pattern through a .019-inch orifice. Titan classifies this professional reversible airless tip for most traffic paints with medium-film application in pavement and line-marking work.
Select the TR1 219 when the job requires a narrow 2-inch stripe with more material delivery than smaller .013-, .015-, or .017-inch 2-inch-pattern TR1 tips. Confirm your line striper supports the .019-inch opening before use.
| Detail | Technical / Commercial Information |
|---|---|
| Product Overview | Titan 697-219 is a TR1 reversible airless line-striping tip for professional marking applications. Titan specifies a 2-inch / 51 mm nominal line width and .019-inch / .48 mm orifice. In Titan's TR1 chart, this configuration is categorized for most traffic paints with medium-film application. |
| Function | The .019-inch precision orifice meters coating while the tip geometry forms a narrow 2-inch nominal striping pattern. Its reversible design lets the operator rotate the tip to the reverse position to help clear certain spray-tip obstructions before returning it to the spraying position. |
| Industrial Applications | Suitable for professional traffic and pavement-marking projects requiring a relatively narrow stripe with medium film. Potential applications include parking facilities, traffic layouts, industrial pavement markings and other compatible line-marking work where a 2-inch nominal pattern and .019-inch orifice match the project specification. |
| Accurate Compatible Titan Machines | Titan publishes 697-219 in official TR1 tip charts for PowrLiner equipment, including PowrLiner 550, PowrLiner 2850 and PowrLiner 3500 documentation. It may also be used with other compatible Titan PowrLiner configurations whose maximum supported tip capacity accommodates a .019-inch tip for the intended gun setup. |
| Accurate Part Number | Titan 697-219 — TR1 219 reversible line-striping tip. Verified manufacturer specifications are a 2-inch / 51 mm nominal line width and .019-inch / .48 mm orifice. Titan classifies this selection as medium film within its “Most traffic paints” group. |
| Compatible Parts & Assemblies | Use with a compatible Titan line-striping spray gun, reversible-tip guard, tip seal, gun filtration and high-pressure fluid-delivery system. The complete PowrLiner and gun configuration must have sufficient output and maximum tip capacity for the .019-inch opening and selected traffic coating. |
| Related Parts Commonly Serviced Together | When servicing or replacing the spray tip, inspect the compatible tip guard and seal, gun filter, gun fluid passages, high-pressure hose connections and machine filtration. Wear or restrictions elsewhere in the fluid system can affect pressure, material delivery, fan definition and overall stripe quality. |
| Common Problems Solved | Replacing a worn 697-219 can help restore the intended fan pattern when normal abrasive wear causes poor edge definition or changes in coating delivery. The reversible design also helps operators clear certain tip blockages quickly during production without immediately removing the tip from the gun. |
| Use with Coating Systems | Titan places 697-219 in the “Most traffic paints” section of its TR1 striping-tip chart and specifies medium-film application. Coating viscosity, solids content, filtration, pressure and equipment capacity must still be considered. Always verify that the coating manufacturer permits a .019-inch airless tip. |
| OEM & Brand Information | 697-219 is a genuine Titan Tool TR1 line-striping tip documented in Titan PowrLiner operating literature. Titan's TR1 range provides multiple line-width and orifice combinations for matching professional striping equipment to different traffic-paint, film-build and marking requirements. |
| Commercial Benefits | The 219 configuration combines a narrow 2-inch nominal stripe with a larger .019-inch opening than Titan's 213, 215 and 217 two-inch TR1 options. It gives contractors a manufacturer-specified medium-film choice for most traffic paints while retaining the operational convenience of a reversible airless tip. |
Contractor Selection Insight
Choose Titan 697-219 when you need a narrow 2-inch nominal stripe but want a .019-inch opening for medium-film application with most traffic paints. Compared with 697-217, the 219 increases the orifice from .017 to .019 inch and moves from Titan's alkyd-only heavy-film stencil/court category into the broader traffic-paint group. For the same .019-inch orifice with wider stripes, Titan lists 697-419 at 4 inches and 697-619 at 6 inches.
FAQ Section
Key answers for contractors selecting Titan 697-219 TR1.
No reviews yet. Be the first to review this product!