Titan part 500750050ML is a heavy-duty 7500 PSI Airless Hose measuring 1/2" diameter by 50 meters long, designed for high-volume fluid transfer in professional spraying applications. This hose is engineered to withstand the extreme pressures generated by Titan Hydrax series spray pumps while providing the flow capacity needed for high-production work. The larger 1/2" diameter allows greater material flow compared to standard 3/8" hoses.
| Part Number | 500750050ML |
|---|---|
| Part Description | Airless Hose 7500, 1/2" X 50 ML |
| Brand | Titan |
| Fits | Hydrax 4540 through 7230 series sprayers |
| Condition | New |
The Titan 500750050ML Airless Hose is a professional-grade fluid transfer hose rated for 7500 PSI operation, specifically designed for Titan Hydrax series high-output sprayers. With its larger 1/2" diameter and 50-meter (164-foot) length, this hose provides superior flow capacity for high-volume spraying applications while maintaining the strength to handle extreme pressures. The "ML" designation indicates metric length measurement.
This heavy-duty hose is engineered for professional contractors and industrial applications where both high pressure and high flow rates are required. The 1/2" diameter provides approximately 78% more cross-sectional area than standard 3/8" hoses, significantly reducing pressure drop over long distances and allowing more material to reach the spray gun. This is particularly important for Hydrax series sprayers which are designed for high-production work on large commercial and industrial projects.
The 1/2" diameter provides significantly greater flow capacity compared to standard 3/8" hoses, reducing pressure drop and allowing faster material delivery to the spray gun. This is especially beneficial for high-production applications, large area coverage, or when using higher viscosity materials. The larger diameter also helps maintain consistent pressure at the gun when working at maximum extension distances.
| Pressure rating | 7500 PSI maximum working pressure |
|---|---|
| Diameter | 1/2" inner diameter (larger than standard 3/8" hoses) |
| Length | 50 meters (164 feet) - ML indicates metric length |
| Connectors | Standard airless swivel connectors for 1/2" systems |
| Flow capacity | Approximately 78% greater than 3/8" diameter hoses |
| High-pressure design | Multi-layer reinforcement for 7500 PSI Hydrax systems |
|---|---|
| Reduced pressure drop | Larger diameter minimizes pressure loss over long distances |
| High-flow capability | Supports maximum output of Hydrax series sprayers |
| Professional construction | Designed for continuous commercial/industrial use |
| Material compatibility | Suitable for high-viscosity materials and heavy coatings |
Titan part 500750050ML is specifically designed for Titan Hydrax series sprayers from models 4540 through 7230. These are Titan's highest-output professional sprayers, and the 1/2" hose diameter is engineered to match their high-flow capabilities. The hose features standard 1/2" airless connectors that are compatible with these systems.
| Compatible Series | Model Range | Hose Specification |
|---|---|---|
| Hydrax Series | 4540 through 7230 models | 1/2" x 50M, 7500 PSI |
The 1/2" diameter hose provides significant advantages in specific applications:
When using high-output sprayers like Hydrax series at maximum flow rates.
When working far from the sprayer, reduces pressure drop over distance.
With heavy coatings, thick materials, or high-solids content products.
High-pressure hoses require careful handling and regular inspection:
Check for cuts, abrasions, bulging, or worn areas before each use.
Avoid sharp bends, kinks, or crushing that could damage hose structure.
Always depressurize system before disconnecting or servicing hoses.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
