Please wait while we process your order...

Product successfully added to your cart.
Placeholder Image

Quantity in Cart: 1


Continue Shopping Shopping Cart
Item removed from Cart
X
 
×
Titan 500-200-10 Yellow 100 Mesh - Fine (2-Pack)

Titan 500-200-10 Yellow 100 Mesh - Fine (2-Pack)

Sourced From:
Titan Tools Inc.

The 500-200-10 Yellow 100 Mesh - Fine (2-Pack) is an OEM gun filter set designed for select Titan airless spray guns and sprayers. These fine-mesh filters help remove debris from the coating material, improving spray consistency and reducing tip clogs when spraying thin to medium-viscosity materials.

Part Number 500-200-10
Product Type Airless Gun Filter - Fine Mesh
Mesh / Color 100 Mesh - Yellow
Condition New OEM
Includes Components Yellow 100-mesh gun filters (2-pack)
Fits Airless LX 80 II Strip;
Airless LX 80 II;
Airless LX 80 Platinum;
Impact 340 Airless Sprayer;
Impact 400 Airless Sprayer

$17.9

Yellow 100 Mesh Fine Gun Filters for Titan Airless Sprayers

The 500-200-10 Yellow 100 Mesh – Fine (2-Pack) is a factory-specified gun filter set used in Titan LX-series airless spray guns and compatible Impact airless sprayers. The 100-mesh filtration level is intended for finer materials where consistent atomization and clean spray patterns are critical.

Clean, properly sized gun filters help protect spray tips, reduce downtime from clogging, and improve overall finish quality. Using the correct mesh size is essential to balance material flow and filtration.

Service Guidance: Remove and clean gun filters regularly. Replace filters that are crushed, torn, or permanently clogged to maintain proper flow.

What it does and when to replace it

What the 100-mesh filter does
Fine filtration Captures small debris before it reaches the spray tip
Tip protection Reduces clogging and tip wear
Finish quality Supports smooth, even spray patterns
When replacement is recommended
Restricted flow Noticeable pressure drop or reduced material output
Visible damage Crushed, torn, or deformed filter screen
Persistent clogging Filter does not clean fully after flushing
Routine maintenance Replaced as part of regular gun service

Compatibility

Part 500-200-10 is compatible with the following Titan airless guns and sprayers. Always verify mesh size requirements for your coating material.

Model Component
Airless LX 80 II Strip Yellow 100 Mesh Gun Filter (500-200-10)
Airless LX 80 II Yellow 100 Mesh Gun Filter (500-200-10)
Airless LX 80 Platinum Yellow 100 Mesh Gun Filter (500-200-10)
Impact 340 Airless Sprayer Yellow 100 Mesh Gun Filter (500-200-10)
Impact 400 Airless Sprayer Yellow 100 Mesh Gun Filter (500-200-10)

Related parts commonly serviced together

Airless spray tips

Clean tips regularly to complement proper gun filtration.

Manifold / inlet filters

Additional upstream filtration helps extend gun filter life.

Gun seals and needles

Inspect during routine gun maintenance.

Frequently Asked Questions

100 mesh indicates a fine filter size suitable for thinner materials and fine finishes.

This listing includes two yellow 100-mesh gun filters.

Thicker materials may require a coarser mesh to prevent flow restriction.

Replacement depends on material cleanliness and usage, but filters should be inspected daily.

Confirm part number 500-200-10 in the gun or sprayer parts diagram for your model.