Titan Control Max HEA Accessories Parts
Find Titan ControlMax HEA accessories and related spray-system components for compatible ControlMax airless sprayers. Use this category to identify HEA spray-tip, tip-guard, hose and spray-system requirements, then confirm compatibility with your exact ControlMax model before ordering.
Choose ControlMax HEA Accessories by Application
Titan ControlMax sprayers use High Efficiency Airless technology to provide a more controlled lower-pressure airless spray system. The correct accessory depends on the sprayer model, coating, required spray pattern, hose configuration and the type of work being performed.
Use this page as the accessory hub for the ControlMax family. For internal repair components, continue to the appropriate main assembly, spray-gun assembly or suction-set diagram rather than ordering an accessory to correct a mechanical problem.
What Makes Titan HEA Accessories Different?
Titan's HEA tip technology is engineered for lower-pressure airless spraying. The HEA system produces a softer, more controlled spray pattern than conventional higher-pressure airless operation and is designed to reduce unnecessary overspray while maintaining productive coverage.
Choose the Right Titan ControlMax HEA Accessory
Start with the function you need, then verify the exact accessory against your ControlMax model.
| Accessory Type | Primary Purpose | What to Verify | Buying Consideration |
|---|---|---|---|
| HEA Spray Tip | Controls spray fan and material flow | Fan width, orifice size, coating and sprayer capability | Do not exceed the maximum tip size specified for your sprayer. |
| Tip Guard | Supports and positions the compatible spray tip | Gun, tip and guard compatibility | Confirm the complete tip/guard interface before ordering. |
| Airless Hose | Carries pressurized coating from sprayer to gun | Pressure rating, connection, diameter and required length | Use only hose suitable for the pressure and configuration of the spray system. |
| Spray Gun | Operator control of pressurized coating | Pressure rating, hose connection, tip system and sprayer compatibility | Do not assume every Titan airless gun is the same as the ControlMax gun. |
| Extension / Reach Accessory | Extends application reach where an approved configuration is used | Gun, guard and system compatibility | Confirm compatibility before adding reach accessories to the spray system. |
Understand HEA Tip Numbers Before Ordering
Spray-tip selection affects both fan width and material flow. A larger tip is not automatically better. Select the tip according to the coating, surface, desired spray pattern and the maximum tip capacity of the specific ControlMax sprayer.
Match the Accessory to the Job
Use the Correct ControlMax Category
Accessories change, complete or support the spray configuration. Internal pump components, suction parts, valves, motor components and individual gun-service parts belong in the appropriate exploded parts diagram. If you are repairing a failed component rather than changing the spray setup, use the model-specific parts section below.
Need a Replacement Part Instead of an Accessory?
Choose the assembly that contains the component you need to repair.
Looking for a Specific ControlMax HEA Accessory?
Not every genuine Titan component or accessory is necessarily displayed in this category. If the accessory you need is not shown, search AllTitanParts.com using the Titan part number from your manual or parts documentation.
If you do not know the part number, identify your exact ControlMax model and the accessory function you need before purchasing. This helps prevent confusion between an accessory, a complete assembly and an individual service component.
Verify These Five Details
Use Accessories Within the Approved Spray-System Configuration
Airless spray systems operate with pressurized coating capable of causing injection injury. Use appropriately rated guns, hoses, fittings, guards and accessories. Shut down the sprayer and follow the manufacturer's pressure-relief procedure before removing or installing any pressurized fluid-system component.
Find the Right Titan ControlMax HEA Accessory
Match the accessory to your exact ControlMax sprayer, coating and application. For internal replacement parts, use the appropriate ControlMax exploded parts diagram to identify the correct Titan OEM component.
RETURN TO ACCESSORIES ↑Titan ControlMax HEA Accessories FAQ
01. What are Titan ControlMax HEA accessories?
02. What does HEA mean on a Titan sprayer?
03. How do I choose a ControlMax HEA spray tip?
04. What does a 515 HEA spray tip mean?
05. Can I install any airless hose on a ControlMax sprayer?
06. Are ControlMax accessories the same as internal replacement parts?
07. Where can I find ControlMax spray-gun replacement parts?
08. What should I do if the ControlMax accessory I need is not listed?
Not Sure Which ControlMax Accessory You Need?
Have your exact Titan ControlMax model and current accessory or OEM part number available. For spray-tip selection, also identify the coating, current tip size and desired spray pattern. These details provide a stronger basis for selecting the correct accessory.